90
Installation and Maintenance
Service Manual
24K
Electric heater band is not shown.
Twist off the screws used for fixing the handle and
v
alve cover
,
pull the handle and v
alve cover
up
ward to remove it.
b
a
a
1. Remove top panel
Remove the 3 screws connecting the top
panel with the front panel and the right side
plate, and then remove the top panel.
top panel
2. Remove grille,
front side plate and panel.
Remove
Remove the 1 screw connecting the front side
plate and the panel,and then remove the front
side plate.
the 2 screws connecting the grille
and the panel, and then remove the grille.
b
Steps
Procedure
handle
valve cover
grille
front side plate
To Next Page
Loading...
