123
Installation and Maintenance
Service Manual
Step Procedure
4. Remove front side panel
Loosen the screws connecting the front side panel and
chassis. Remove the front side panel.
5. Remove grille and panel
Twist off the screws connecting the grille and panel,
and then remove the grille.
Twist off the screws connecting the panel, chassis and
motor support with screwd-river, and then remove the
panel.
6. Remove right side plate
Twist off the screws connecting the right side plate
and chassis, valve support and condenser, and then
remove the right side plate.
Front side panel
Panel
Grille
Right side plate
To Next Page
Loading...
