124
Installation and Maintenance
Service Manual
Step Procedure
7. Remove axial ow blade
Twist off the nuts on blade with wrench and then
remove the axial ow blade.
8. Remove electric box assy
Twist off the screws on electric box, cut off the tieline
with scissors or pliers, pull out the wiring terminal, pull it
upwards to remove the electric box.
9. Remove motor and motor support
Twist off the tapping screws fixing the motor, pull out
the pin of leading wire for motor and then remove the
motor.
Twist off the tapping screws fixingthe motor support,
pull it upwardsand then remove the motor support.
Nut
Axial ow blade
Motor support
Electric box assy
Motor
To Next Page
Loading...
