EasyManua.ls Logo

Gree GWH24MD-D3DNA3D - Troubleshooting; System Not Restarting; Unpleasant Odor; Water Flowing Sounds; Fog or Vapor; System Not Running; Inefficient Performance

Gree GWH24MD-D3DNA3D
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
CARE AND CLEANING
CLEANING THE PRIMARY AIR FILTER
Cleaning is recommended every three months.
NOTE: If the indoor unit is exposed to excessive dust, cleaning may be necessary more often.
Use caution when removing the filter to avoid sharp metal extensions.
1. Remove air filter by tilting up the unit cover and pulling filter free.
2. Clean air filter using a vacuum or warm water and mild cleaner. Air dry filter in the shade.
Never use fire to clean stains or debris on filter.
3. Reinsert the filter being, careful to align
properly, then close unit.
CLEANING OPTIONAL PHOTOCATALYTIC FILTER
Clean every 2 weeks for the best results.
1. Remove photocatalytic filter from front face of primary air filter.
2. Clean lint and dust from air filter using vacuum.
NOTE: Do not get photocatalytic filter wet.
3. Place photocatalytic filter in direct sunlight for 60 minutes to energize catalyst.
4. Re-install the photocatalytic air filter on the unit by inserting it back on the primary air filter.

Other manuals for Gree GWH24MD-D3DNA3D

Related product manuals