To Next PageTo Next PageWhy is my Gree Vita GWH12ATCXB-D3DNA3C/I Heat Pump compressor not working?
The compressor in your Gree Heat Pump might not be operating because the unit was recently restarted or the operation mode was recently changed. A 3-minute protection delay is triggered to protect the compressor. Wait until this delay has elapsed.
What to do if my Gree Vita GWH12ATCXB-D3DNA3C/I Heat Pump indoor unit does not appear to be operating?
If your Gree Heat Pump indoor unit isn't working, it could be due to several reasons: * A power outage: Wait for the power to be restored, then restart the unit. * A loose power cord: Firmly push the plug into the power outlet. * A tripped circuit breaker or blown fuse: Replace the fuse or reset the circuit breaker, ensuring no other appliances overload the same circuit. * An active switch-on timer: Cancel the timer using the remote control or wait for the unit to start at the set time.
How to get rid of bad smells from my Gree Vita GWH12ATCXB-D3DNA3C/I?
If your Gree Heat Pump emits undesirable odors, it could be due to odors caught by the unit or a dirty dust filter. Remove any odor sources near the indoor or outdoor units and check and clean the dust filter.
Why does my Gree Vita GWH12ATCXB-D3DNA3C/I Heat Pump indoor unit make cracking sounds?
If your Gree Heat Pump indoor unit emits cracking sounds, especially after being turned on or off, it's a normal phenomenon. The plastic components are subject to thermal expansion and contraction due to temperature changes, so no action is required.
Why does my Gree Vita GWH12ATCXB-D3DNA3C/I indoor unit sound like flowing liquid?
If your Gree Heat Pump indoor unit emits a sound of flowing liquid, especially after being turned on or off, it's a normal phenomenon. The refrigerant inside the unit is moving due to operation starting, which produces this sound, so no action is required.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Refrigerant | R32 |
| Refrigerant Type | R32 |
| Type | Heat Pump |
| Model | GWH12ATCXB-D3DNA3C/I |
| Cooling Capacity (BTU) | 12000 BTU |
| Power Supply | 220-240V, 50Hz, 1Ph |
Explains hazard symbols (DANGER, WARNING, CAUTION, NOTE) used throughout the manual.
Provides crucial safety instructions for operating and maintaining the heat pump unit.
Explains the remote control buttons and display indicators for operating the heat pump unit.
Details how to set the desired temperature and select fan speed for optimal comfort.
Provides a list of error codes and their corresponding solutions for diagnosing unit issues.
Addresses common malfunctions like no operation, abnormal sounds, or odors with potential fixes.
