To Next PageTo Next PageWhy is my Gree Vita GWC12ATCXB-D3DNA1C/O compressor not working?
The compressor in your Gree Heat Pump might not be operating because the unit was recently restarted or the operation mode was recently changed. A 3-minute protection delay is triggered to protect the compressor. Wait until this delay has elapsed.
What to do if my Gree Vita GWC12ATCXB-D3DNA1C/O indoor unit does not appear to be operating?
If your Gree Heat Pump indoor unit isn't working, it could be due to several reasons: * A power outage: Wait for the power to be restored, then restart the unit. * A loose power cord: Firmly push the plug into the power outlet. * A tripped circuit breaker or blown fuse: Replace the fuse or reset the circuit breaker, ensuring no other appliances overload the same circuit. * An active switch-on timer: Cancel the timer using the remote control or wait for the unit to start at the set time.
How to get rid of bad smells from my Gree Vita GWC12ATCXB-D3DNA1C/O?
If your Gree Heat Pump emits undesirable odors, it could be due to odors caught by the unit or a dirty dust filter. Remove any odor sources near the indoor or outdoor units and check and clean the dust filter.
Why does my Gree Heat Pump indoor unit make cracking sounds?
If your Gree Heat Pump indoor unit emits cracking sounds, especially after being turned on or off, it's a normal phenomenon. The plastic components are subject to thermal expansion and contraction due to temperature changes, so no action is required.
Why does my Gree Vita GWC12ATCXB-D3DNA1C/O Heat Pump indoor unit sound like flowing liquid?
If your Gree Heat Pump indoor unit emits a sound of flowing liquid, especially after being turned on or off, it's a normal phenomenon. The refrigerant inside the unit is moving due to operation starting, which produces this sound, so no action is required.
Explains symbols indicating hazards and precautions in the manual.
Provides critical safety advice for operating and maintaining the heat pump.
Details the function of each button on the remote control for operating the unit.
Explains the various icons and indicators shown on the remote control display.
Covers battery replacement and essential usage recommendations for the remote control.
Explains how to use specific functions like Power ON/OFF and setting operation modes.
Describes how to adjust the desired temperature using the remote control.
Covers setting up switch-on and switch-off timers for automated operation.
Step-by-step guide on how to remove, wash, and reinstall the dust filter.
Lists common error codes, their descriptions, and suggested solutions for the unit.
Provides a guide to common operational issues and their potential causes and resolutions.
Addresses issues related to the remote control not communicating with the unit.
General