To Next PageTo Next Page
Need help?Do you have a question about the Gree VIREO GEN3 3VIR09HP115V1A and is the answer not in the manual?
General| Model Number | 3VIR09HP115V1A |
|---|---|
| Category | Heat Pump |
| Heating Seasonal Performance Factor (HSPF) | 10 |
| Voltage | 115V |
| Refrigerant | R410A |
| Compressor Type | Inverter |
| Phase | 1 |
| Outdoor Unit Noise Level | 50 dB(A) |
| Outdoor Unit Weight | 66.1 lbs |
| Cooling Capacity | 9000 BTU/h |
| Operating Temperature (Cooling) | 5°F to 122°F |
| Heating Capacity | 10, 000 BTU/h |
Detailed technical specifications for indoor and outdoor units.
Graphs showing cooling/heating capacity changes with outdoor temperature.
Rated cooling/heating conditions, pressure, and temperature data.
Graphs showing sound pressure levels at different fan speeds and modes.
Dimensional drawings and mounting frame details for indoor units.
Dimensional drawings for various outdoor unit models.
Electrical schematics for indoor and outdoor unit wiring.
Layouts of printed circuit boards for indoor and outdoor units.
Explanation of remote controller buttons and functions.
Guide for operating the unit via the GREE+ mobile application.
Guide for operating the unit via the Ewpe Smart mobile application.
Detailed explanation of operational modes and system functions.
Essential safety guidelines for installation and maintenance procedures.
Specific safety rules for electrical work related to the unit.
Guidelines for safe and proper physical installation of the unit.
Safety measures for handling refrigerants during installation/maintenance.
List and images of essential tools required for installation and maintenance.
Visual guide showing required clearances for unit placement.
List of components to check before starting installation.
Criteria for choosing optimal indoor and outdoor unit locations.
Guidelines for safe and correct electrical connections.
Step-by-step instructions for mounting and installing the indoor unit.
Step-by-step instructions for mounting and installing the outdoor unit.
Procedures for removing air and checking for refrigerant leaks.
Final checks and procedures for testing the installed unit.
Table listing error codes, their display methods, status, and possible causes.
Diagnostic flowcharts for common malfunctions and their solutions.
Guide for addressing common issues that don't trigger error codes.
Step-by-step instructions for disassembling the indoor unit.
Step-by-step instructions for disassembling the outdoor unit.
Conversion table for temperature units.
Details on pipe sizing, length, and refrigerant charging.
Instructions and diagrams for properly expanding refrigerant pipes.
Tables showing resistance values for temperature sensors at various temperatures.
