To Next PageTo Next PageWhy is my Gree Vita GWH18ATDXD-D3DNA1A/O compressor not working?
The compressor in your Gree Heat Pump might not be operating because the unit was recently restarted or the operation mode was recently changed. A 3-minute protection delay is triggered to protect the compressor. Wait until this delay has elapsed.
What to do if my Gree Vita GWH18ATDXD-D3DNA1A/O indoor unit does not appear to be operating?
If your Gree Heat Pump indoor unit isn't working, it could be due to several reasons: * A power outage: Wait for the power to be restored, then restart the unit. * A loose power cord: Firmly push the plug into the power outlet. * A tripped circuit breaker or blown fuse: Replace the fuse or reset the circuit breaker, ensuring no other appliances overload the same circuit. * An active switch-on timer: Cancel the timer using the remote control or wait for the unit to start at the set time.
How to get rid of bad smells from my Gree Heat Pump?
If your Gree Heat Pump emits undesirable odors, it could be due to odors caught by the unit or a dirty dust filter. Remove any odor sources near the indoor or outdoor units and check and clean the dust filter.
Why does my Gree Vita GWH18ATDXD-D3DNA1A/O Heat Pump indoor unit make cracking sounds?
If your Gree Heat Pump indoor unit emits cracking sounds, especially after being turned on or off, it's a normal phenomenon. The plastic components are subject to thermal expansion and contraction due to temperature changes, so no action is required.
Why does my Gree Vita GWH18ATDXD-D3DNA1A/O indoor unit sound like flowing liquid?
If your Gree Heat Pump indoor unit emits a sound of flowing liquid, especially after being turned on or off, it's a normal phenomenon. The refrigerant inside the unit is moving due to operation starting, which produces this sound, so no action is required.
Explains symbols indicating immediate or potential hazards for user safety.
Details FCC and IC regulations regarding device operation and interference.
Provides essential safety precautions for operating and maintaining the heat pump unit.
Details the parts and features of the indoor unit of the heat pump system.
Details the parts and features of the outdoor unit of the heat pump system.
Details remote control buttons, display screen indicators, and basic operation.
Explains how to set Auto, Cooling, Drying, Ventilation, and Heating modes.
Guides on adjusting temperature, fan speed, and airflow direction (swing).
Covers timers, I Feel, clock, sleep modes, WiFi, and special cleaning/saving functions.
Instructions for cleaning the unit's surface and the dust filter for optimal performance.
Guidance on pre/post-season checks and responsible recycling of components.
Identifies unit error codes and provides corresponding solutions for troubleshooting.
Addresses common operational issues and offers practical solutions for user-level fixes.
Details the product's warranty coverage, terms, and conditions.
General