Operating Procedures / Photos
Disassemble Cabinet
Unscrew the screws fixing the cabinet to remove it.
Screw
Cabinet
Disassemble Electric Box Sub-assy
Unscrew the 2 screws fixing electric box to pull out
the connection line between fan motor and electric
box ,and then lift the electric box to take it out.
Screw
Electric
Box
Disassemble Gas and Liquid Valves
Unsolder the pipeline connecting with valves ( to prevent
soldering gun from burning out the chassis).Unscrew
2 bolts fixing gas valve ,and then unsolder the weld
spot between pipeline and gas valve to remove gas
valve. Unscrew the 2 bolts fixing liquid valve ,and
then unsolder the soldering spot between pipeline
and liquid valve to remove liquid valve.
(Note:During unsoldering ,wrap the valves with
wet cloth avoid damage for high temperature.)
Liquid Valve
Bolts
Gas Valve
Downloaded from AC-Manual.com Manuals
To Next Page
Loading...
