Artful
Operating Procedures / Photos
Disassemble Axial Flow Fan
Unscrew the nut fixing the fan with a spanner to
take out the fan .
Nut
Axial Flow
Fan
Disassemble Outdoor Motor
Unscrew the screws fixing the motor support ,and
then lift it upwards to remove it. Unscrew the screws
fixing the motor and pull out the connection line between
it and electric box to remove it.
Motor
Terminal Screw
of Motor
Motor Support
Terminal Screws
Motor Wire
Wire-passing
Hole
Clapboard
Disassemble Four-way Valve
Only for cooling and heating unit
Unscrew the fastening nut of the four-way valve coil
and remove the coil. Wrap the four-way valve with
wet cotton and unsolder the 4 weld spots connecting
the four-way valve to take it out. Welding process
should be as quick as possible and keep wrapping
cotton wet all the time. Be sure not to burn out the
lead-out wire of compressor.
Four-way
Valve
Weld spots
Downloaded from AC-Manual.com Manuals
To Next Page
Loading...
