Gree KWCA09A0 - Page 20

www.enviromaster.com
EnviroAir High Wall Ductless Split Systems
20
Temperature adjustment in AUTO SELECT mode
To adjust the air temperature during AUTO SELECT
mode, point the remote control toward the indoor air
conditioning unit:
1) Press the
button once. To raise the set point
temperature 1°C or 1°F.
2) Press the
button once, to reduce the set
point temperature 1°C or 1°F.
COOL/HEAT
& FAN/DRY mode
Point the remote control toward the indoor air condition
-
ing unit:
1) Press the ON/OFF button.
2) Press the MODE
button, select the mode of
operation; COOL, DRY, HEAT/FAN or AUTO.
3) Press the
or to set the desired tem-
perature.
Heat Cool
64°F- 88°F
(16°C-31°C)
64°F- 88°F
(16°C-31°C)
Once minimum or maximum setting is reached
operation will be continued by
pressing or
4) Press the FAN SPEED button to set the de-
sired air flow rate.
Press the ON/OFF button again to stop.
Notes:
• In the COOLING-ONLY operation, the HEAT
mode will disable, and it will go to FAN mode.
• The settings can be changed even while the air
conditioner is off.
Remote Control Operation
OPERATION SECTION FOR
KWCA/K1CA09/12 & KWHA/K1HA09/12