www.enviromaster.com
EnviroAir High Wall Ductless Split Systems
29
Remote Control Operation
OPERATION SECTION FOR
KWCA/K1CA18/24 & KWHA/K1HA18/24
Temperature adjustment in AUTO SELECT mode
To adjust the air temperature during AUTO SELECT
mode, point the remote control toward the indoor air
conditioning unit:
1) Press the
button once, to raise the set point
1°C or 1°F.
2) Press the
button once, to reduce the set
point temperature 1°C or 1°F.
COOL/HEAT
& FAN/DRY mode
Point the remote control toward the indoor air condition-
ing unit:
1) Press the ON/OFF button.
2) Press the MODE
button, select the mode of
operation; COOL, DRY, HEAT/FAN or AUTO.
3) Press the
or to set the desired tem-
perature.
Heat Cool
64°F- 88°F
(16°C-31°C)
64°F- 88°F
(16°C-31°C)
Once minimum or maximum setting is reached
operation will be continued by
pressing or
4) Press the FAN SPEED button to set the de-
sired air flow rate.
Press the ON/OFF button again to stop.
Notes:
• In the COOLING-ONLY operation, the HEAT
mode will disable, and it will go to FAN mode.
• The settings can be changed even while the air
conditioner is off.
To Next Page
Loading...
