D Series Modular Air-cooled Scroll Chillers 
34
6.6 Setup of Toggle Switches on the Motherboard
Four bit toggle switches are used for indicating hardware address (1~16) of modules, with module No. 
displayed in  turn  on  the  panel  as  Module 1,  Module  2, ……, Module  16.  Toggle  switches  1,  2, 3  and  4 
are binary code,  with  1  for the lowest  bit  and  4 for the  highest  bit.  Comparison drawings are  as  follows 
(Caution: only in the condition of power supply shuto can toggle switches be set):  
6.7 Jumpers
When it is required to  replace  the  main  board,  be sure the main board  can  match  with  the  applicable 
jumpers.
LSQWRF65M/D-M 6 4202300106
6
LSQWRF80M/D-M 7 4202300107
7
LSQWRF130M/D-M 6 4202300106
6
LSQWRF160M/D-M 7 4202300107
7
LSQWRF65M/NaD-M 14 4202300114
14
LSQWRF80M/NaD-M 15 4202300115
15
LSQWRF130M/NaD-M 14 4202300114
14
LSQWRF160M/NaD-M 15 4202300115
15