9
OPERATION OF WIRELESS REMOTE CONTROLLER
TIMER ON Button
• Press the TIMER ON button to enter TIMER mode. The TIMER ON icon will begin
flashing. Set the time period when the unit will turn on by pressing the + or - buttons.
Press once for slow adjustment and hold down for fast adjustment.
TIMER OFF Button
• Press the TIMER OFF button to enter TIMER mode. The TIMER OFF icon will begin
flashing. Set the time period when the unit will turn off by pressing the + or - buttons.
Press once for slow adjustment and hold down for fast adjustment.
Temp Button
• Press this button to select either Room Setpoint, Room Temperature or Outdoor
Temperature on the indoor unit front panel display. The front panel display will always
revert to room setpoint after 5 seconds. When the indoor unit first powers on it will
display the room setpoint setting. Look for the “thermometer” icon to appear inside
or outside the ”house” icon on the remote controller display, indicating whether the
front panel is displaying room setpoint, indoor or outdoor temperatures.
SLEEP Button
• Press the SLEEP button to activate SLEEP function and select one of three comfortable
SLEEP modes. The SLEEP icon will be displayed.
VERTICAL SWING LOUVER
• Press the button to adjust the direction of airflow in the room. By moving the
louvers up or down, you can control the air for maximum comfort.
To Next Page
Loading...
Need help?
General
