Why does my Gree Heat Pump have high pressure protection?
If your Gree Heat Pump is experiencing high pressure protection, it could be due to several reasons. The system might have too much refrigerant, be operating in high ambient conditions, or suffering from low airflow. To address this, adjust the refrigerant levels as needed and ensure that there is proper airflow around the unit.
Why does my Gree Heat Pump have compressor overload protection?
Compressor overload protection in your Gree Heat Pump can be triggered by a few reasons: low refrigerant charge, a blocked capillary, or a failure in the compressor motor. It's recommended to inspect the refrigerant charge, check for any blockages in the capillary, and assess the condition of the compressor motor.
What causes high current protection in Gree Heat Pump?
High current protection in your Gree Heat Pump may be due to an unstable power supply with a voltage range that's too large. You should verify the stability of the power supply and make sure the voltage range is within acceptable limits.
What causes IPM module protection in Gree Heat Pump?
The IPM Module protection in your Gree Heat Pump activates if the IPM Module temperature is too high, due to high ambient temperature, low voltage, or bad connections. Ensure the IPM Module is operating within proper temperature limits, and assess the ambient conditions and connections.
What to do if Gree Heat Pump has a 4-way valve malfunction?
If your Gree Heat Pump is experiencing a 4-way valve malfunction, it could be due to a bad connection, solenoid failure, or a malfunction within the valve itself. You should evaluate the connection, test the solenoid, and check for any valve malfunctions.
What to do if my Gree Heat Pump shows an indoor air temperature thermistor error?
If your Gree Heat Pump displays an error related to the indoor air temperature thermistor, it could be due to a bad connection or a failure of the indoor air sensor. Begin by inspecting the connections. If the connections are secure, consider replacing the indoor air sensor.
What causes high current protection in my Gree Heat Pump?
If your Gree Heat Pump is experiencing high current protection, it might be due to an unstable power supply with a voltage range that is too large. To resolve this, stabilize the power supply and check the voltage range to ensure it is within the recommended limits.
How to troubleshoot a 4-way valve malfunction in a Gree Heat Pump?
If your Gree Heat Pump's 4-way valve is malfunctioning, especially in heat pump models, it could be due to a bad connection, solenoid failure, or the valve itself malfunctioning. Inspect the connections and solenoid to ensure they are operating correctly. This troubleshooting step is specific to heat pump models.
What to do if my Gree Heat Pump shows a communication error?
If your Gree Heat Pump shows a communication error, the first step is to check all wiring and connections. The error could stem from mis-wiring or a communication failure, so ensuring everything is correctly connected is crucial.
What to do if Gree Heat Pump has outdoor coil temperature thermistor issues?
If your Gree Heat Pump is having outdoor coil temperature thermistor issues, look into the connection and evaluate the Outdoor Coil Sensor. A bad connection or failure of the outdoor coil sensor could be the cause.
General| Power Supply | 1Ph, 230V, 60Hz |
|---|---|
| Refrigerant | R410A |
| Voltage | 230V |
| Cooling Capacity | 12000 BTU/h |
| Weight (Indoor Unit) | 9.5 kg |
| Weight (Outdoor Unit) | 32 kg |
| Outdoor Unit Noise Level | 52 dB |
| Indoor Unit Dimensions (WxHxD) | 840x290x195 mm |
| Outdoor Unit Dimensions (WxHxD) | 30.3 x 21.7 x 11.8 inches |
| Indoor Unit Weight | 9.5 kg |
| Outdoor Unit Weight | 32 kg |
To Next Page
