15
OPERATION OF WIRELESS REMOTE CONTROLLER
CLOCK SETTING
Press this button to set clock time. “ ” icon on remote controller
will blink. Within 5 seconds, press “+” or “–” button to set clock
time. With each pressing of “+” or “–” buttons, clock time will
increase or decrease 1 minute. To quickly adjust time setting, press
and hold “+” or “–” button for 2 seconds. Release button when
you have reached the desired time setting. Press “CLOCK” button
to confirm the time, and “ ” icon will stop blinking.
NOTE: Clock time adopts 24-hour mode. A 12-hour format
is not available.
FAN BUTTON
Press the FAN button to adjust the fan circulation indoor speed:
Low ( ), Low-Medium ( ), Medium ( ), Medium-High ( ),
High ( ) and Auto.
I FEEL MODE
Press this button to use the I FEEL function, and the ( ) icon
will be displayed. The unit will sense room temperature at the
remote controller instead of at the indoor unit. It then adjusts
airflow and temperature accordingly for the ultimate in personal
comfort control and energy savings. Press the button again to exit
this function. For the best performance, keep the remote controller
within an area where indoor unit can receive the signal sent by
the remote controller and away from heat or cold temperature
sources while using this function.
I Feel Mode Display
Clock Setting Display
Fan Display
To Next Page
Loading...
Need help?
General
