Need help?Do you have a question about the Gree Vireo+ VIR09HP230V1BH and is the answer not in the manual?
General| Cooling Capacity | 9, 000 BTU/h |
|---|---|
| Heating Seasonal Performance Factor (HSPF) | 10 |
| Refrigerant | R410A |
| Compressor Type | Inverter |
| Voltage (V) | 230 |
| Power Supply | 230V |
| Outdoor Noise Level | 50 dB(A) |
Covers warnings for child supervision, qualified personnel, electrical safety, and handling cautions.
Details the five operating modes: HEAT, COOL, DRY, FAN ONLY, and AUTO.
Offers three selectable sleep modes that automatically adjust temperature for comfort and energy savings.
Automatically selects optimal compressor and fan speeds for energy efficiency.
Features built-in diagnostics for error detection, malfunction reporting, and troubleshooting assistance.
Increases comfort and saves energy by eliminating unnecessary defrost cycles in heating mode.
Using the I FEEL function to sense room temperature via the remote controller.
Selecting different operating modes (HEAT, COOL, DRY, FAN ONLY, AUTO) using the MODE button.
Instructions for setting Timer-ON and Timer-OFF functions.
Activating the energy-saving function by adjusting the set temperature automatically.
Addresses the built-in delay preventing short/rapid compressor cycling.
Checks for circuit breakers, remote power, low batteries, or timer/sleep mode issues.
Checks obstructions, dirty filters, air infiltration, or heat sources.
Addresses potential issues like unlevel units or restricted condensate drain pipes.
Checks battery levels, remote range, and suggests using AUX button if needed.
Investigates fan start delays in heating, defrost cycles, or dry mode compressor delays.
To Next Page