Central Air Conditioner Thermostat
16
When the function is disabled, if a power failure occurred while the unit
was stopped, it will automatically restart with a unit stop display when power is
restored.
As shown in the Figure 7 (the function
has been disabled), on the parameter
setting page, press (MODE) to switch
the option number to 01. (UP) or
(DOWN) is provided to allow a switch
between ON and OFF (—enable or disable
the function).
(2) Energy saving function
The unit is allowed to cool or heat in
the energy saving mode (08, 09 in the list). Energy will be saved when the air
conditioner operates within a small range by limiting the cooling and heating
temperatures.
1) The sleep mode is also available upon the energy saving mode.
2) If a power failure occurs, the energy saving mode will restart upon the
restoration of power.
3) If the set temperature in any other modes exceeds the limit of energy
saving mode, the temperature will be adjusted to the limit value.
Figure 7
To Next Page
Loading...
