Central Air Conditioner Thermostat
17
As shown in the Figure 8, on the
parameter setting page, press (MODE)
to switch the option number to 02. (UP)
or (DOWN) is provided to allow a switch
between ON and OFF.
(3) Drying function
If it is enabled while the unit is working
in the cooling condition, the symbol
will be displayed. Pressing ON/OFF key to
stop the unit, the interior fan will cease after
2-minute running. Then, the symbol will
not be displayed if drying is done.
The function is not available in the air
supplying and heating modes. The symbol
will not be displayed.
As shown in the Figure 9, on the
parameter setting page, press (MODE)
to switch the option number to 03. (UP)
or (DOWN) is provided to allow a switch
between ON and OFF.
Figure 8
Figure 9
To Next Page
Loading...
