Central Air Conditioner Thermostat
18
(4) Temperature unit setting
Celsius (°C) or Fahrenheit (°F) is
available. As shown in the Figure 10, on the
parameter setting page, press (MODE)
to switch the option number to 04. (UP)
or (DOWN) is provided to allow a switch
between Celsius (°C) and Fahrenheit (°F).
(5) Fan operation at temperature set
points
The fan is able to run at the set speed,
low speed or stop working when the indoor
ambient temperature reaches the specific
temperature point.
As shown in the Figure 11 on the
parameter setting page, pressing
(MODE) activates a switch to the option
number 05. (UP) or (DOWN)
Figure 10
Figure 11