Central Air Conditioner Thermostat
19
is provided to allow a switch between “00”, “01” and “03”, adjusting the fan
operation.
(6) Temperature calibration
The ambient temperature is allowed
to calibrated between -5°C and +5°C with a
precision of 0.5°C.
As shown in the Figure 12, on the
parameter setting page, press (MODE)
to switch the option number to 06.
(UP) or (DOWN) is provided to a 0.5°C
increase or decrease within -5°C~+5°C.
(7) Temperature variation range
With the narrow range, the temperature features a small amount of
variation for great comfort, but the fan and water valve will operate more
frequently causing loss of service life. Whereas, the wide range does good to
duration of the fan and water valve with a large amount of temperature variation
and low frequency operation. The medium range (“2”) is adopted by default
which is advisable. The three ranges above are available.
Figure 12
To Next Page
Loading...
