EasyManua.ls Logo

Green Cell AiO 600VA - User Manual

Green Cell AiO 600VA
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
BEDIENUNGSANLEITUNG

MODE D’EMPLOI
MANUAL DE USO
MANUALE D’USO
DE
PL
FR
ES
IT
AiO 600VA/800VA
UPS User’s manual

Questions and Answers

  • J
    Joshua LeeAug 9, 2025
    Why does my Green Cell UPS beep constantly during mains power supply and have a short hold-up time?
    • V
      Veronica ValenciaAug 10, 2025
      A constant beeping alarm during mains power supply and a very short hold-up time during battery operation in your Green Cell UPS can be caused by a few things. First, the device might be overloaded; check its load against the technical specifications and disconnect some devices if necessary. Second, the battery may be discharged, so charge it for at least 8 hours. Finally, the battery may be damaged, requiring a replacement with a new one of the same type.
  • J
    Jennifer GreenAug 26, 2025
    How to fix Green Cell UPS when LED diodes are not highlighted?
    • B
      Benjamin WallaceAug 26, 2025
      If the LED diodes on your Green Cell UPS are not highlighted, there could be a few reasons. It could be due to a low battery, in which case you should charge the battery for at least 8 hours. Alternatively, the battery might be faulty, requiring you to replace it with a new one of the same type. Also, make sure the POWER button is pressed; if not, press it again.

Green Cell AiO 600VA Specifications

General IconGeneral
Power Capacity600VA
Output Power360W
Input Voltage230V
Output Voltage230V
TopologyLine-Interactive
Waveform typeSimulated Sine Wave
Output Voltage Regulation±10%
Transfer Time4-8 ms
Battery Voltage12V
Battery Capacity7Ah
Surge ProtectionYes
Overload ProtectionYes
Short Circuit ProtectionYes
Operating Temperature0-40°C
Communication InterfaceUSB
Warranty24 months
Input Frequency50/60 Hz
Battery TypeSealed Lead Acid
OutletsSchuko
Output Frequency50/60 Hz ±1 Hz

Related product manuals