Important
Read before installing
1. Install in accordance with all national and
local electrical codes and local regulations
of your country.
2. The products of the igh system range are
designed to be used and installed in
domestic and similar environments where
there is no need for special protections
against the ingress of water.
3. The installer must hand the user manual
over to the user and should stress that the
user become fully familiar with it.
4. In case of a breakdown or malfunction,
please contact an authorized technician or
the igh products support center.
5. Use only Class II power supply with LPS to
charge the Keypad unit.
6. There are no serviceable parts in this unit.
7. Do not paint on the igh Keypad.
8. Operate between temperatures of -10 °C to
50 °C.
9. Clean the igh Keypad only with a soft dry
cloth. Do not use any chemical cleaners.
To Next Page
Loading...