9
CS-2072
Maintenance
Electric shock hazard:
• Do not attempt to repair this unit. It contains no user-serviceable parts.
• Do not expose the unit to extremes in temperature or high humidity.
Refer to “Specifications.”
Failure to observe these precautions may result in injury and can damage the
unit.
Battery Replacement
Electric shock hazard:
Do not operate with the case open.
Failure to observe this warning could result in severe injury or death.
1. Lift the tab on the bottom end of the belt clip to
release the end cap.
2. Slide the 9 V battery out of the compartment.
Slide a new 9 V battery, terminal side first,
matching (+) and (–) terminals from battery to
case.
3. Slide the clip onto the receiver, pressing down
on the battery until both pieces snap together.
Cleaning
Clean the transmitter with a dry cloth only. Do not expose to liquids.
To Next Page
Loading...
