To Next PageTo Next Page
Need help?Do you have a question about the Greenlee CSJ-100 and is the answer not in the manual?
General| Brand | Greenlee |
|---|---|
| Model | CSJ-100 |
| Category | Measuring Instruments |
| Language | English |
Explains hazard symbols and signal words for severity.
Covers reading manual and electric shock hazard.
Covers moisture, damage, intended use, and EMI.
Covers operating with open case/door, power shutoff.
Covers not repairing, temperature, and humidity limits.
Warns against changing function while connected.
Identifies parts of the meter and display icons.
Explains common symbols used on the device.
Describes how to use the selector switch for different modes.
Explains how to hold the display value or select mode.
Describes using the EF button for electric field detection.
Details the automatic shutdown feature.
Outlines the basic steps for operating the meter.
Provides a table for setting up measurements.
Illustrates how to measure voltage.
Illustrates how to measure resistance.
Shows how to measure AC current using the jaw.
Illustrates diode testing in forward and reverse bias.
Demonstrates how to perform a continuity test.
Explains how to detect electric fields.
Details accuracy for AC/DC voltage, resistance, current, continuity, and diodes.
Lists display, sampling rate, jaw opening, voltage range, EF, and operating conditions.
Defines measurement categories I, II, III, and IV.
Covers repair, temperature, and humidity limits.
Provides instructions for replacing batteries.
Details how to clean the unit.
Details the limited warranty and repair process.
Provides contact information for technical support.
