Tank Full Indicator
When the tank is full, the appliance automatically turns off and tank full indicator will be on.
Auto Dehumidifying Mode (ALPHA-12 PLUS)
Press the Auto button, the unit will work automatically accordance to the ambient humidity detected below.
Ambient RH% detected Compressor
Working
Working
Stop
Fan Speed Level
High
Low
Low
RH%＞65%
55≤RH%≤65%
RH%＜55%
Air Purifying Mode (ALPHA-12 PLUS)
At Air Purifying mode, the unit works with high fan speed without dehumidifying, and the anion function will switch on
automatically.
Note: Anion function can be switched off by pressing and hold the Oscillation button for 2 seconds.
Sleeping Mode (ALPHA-12 PLUS)
At Sleeping mode, all lights will be off 5 seconds after the setting is completed, and the unit works in default humidity setting
of 55% along with low fan speed.
Note: At Sleeping mode, press any button to wake up the unit, then to operate as usual.
Note: When the water tank is full on sleeping mode, water tank full indicator will always be on.
Memory Function:
a. When unplugged directly or power cut, then reconnect to the power supply, the dehumidifier will run with the mode
prior to the shutdown. The timer setting will be kept.
b. Press the power button to switch off the dehumidifier, and then press the power button to switch it back on. The
dehumidifier will run with the mode prior to the shutdown. The timer setting will be canceled.
c. Switch off the dehumidifier and unplug the power cord, then reconnect the power supply and switch on the dehumidifier.
It will run as factory preset mode the first time you received the dehumidifier.
To Next Page
Loading...
