27
5.2.3 MOUNTING RI BARRIER MOWER ON MULTI CARRIER
The procedure may differ from vehicle to vehicle. Therefore, always use the instructions of the vehicle used
and combine them with both the RI barrier mower and the multi carrier instructions and directions used.
In this instruction manual, it is shown and explained how the RI barrier mower
is mounted on a FOX multi carrier using a smaller tractor with a front loader.
Mounting on other types of multi carrier and vehicles takes place in a broad
sense using the same procedure, but always investigate the procedure for the
machines used on your own.
1. The RI barrier mower-adapter is first fitted to the telescopic arm of the FOX multi carrier using M12x100
bolts (x4), face washers (x4) and M12 lock nuts (x4)
Bolts/nuts are tightened with 93 Nm
To Next Page
Loading...