40
5. The working height of the RI barrier mower is adjusted via the multi carrier/control of the front loader
so that it is the appropriate height in relation to the terrain/fence line:
(When the RI barrier mower is in use with the support plate along the ground during mowing, a
cutting height of between 35 – 55 mm is achieved, depending on the blades used.
(See section: Types of blades – page 24)
6. In the beginning, it is recommended to drive the RI barrier mower slowly so that the blades can
maintain the recommended speed. (GreenTec recommends a forward speed of between 3 – 5 km/h
for the RI barrier mower)
Adjust position of the RI barrier mower so that it is at right angle to the work and set the machine to
meet the grass "straight on".
To Next Page
Loading...