3
Warning & Important Info:
Disconnect power before servicing.
Do not mount your pureWash vertically or at any angle. See installation instructions.
(unit is designed to operate horizontally ONLY).
Do not operate the unit with the cover removed.
pureWash is designed for residential use only and is not intended for use in a
commercial or industrial setting.
Water treated by pureWash is intended for laundry ONLY. It is not approved for
drinking or ingesting.
Do not use an extension cord or power adapter other than the one provided with your
pureWash unit.
pureWash is intended for use with COLD WATER ONLY, however the hot water
hose should remain connected to the washer and supply faucet to prevent backow leaks.
To avoid the possibility of water damage (i.e. a hose leak) it is recommended that you
always turn o the water supply valves/faucets when the washing machine is not in use.
Risk of water leaks from ruptured hoses could occur with major water pressure surges.
To maintain pressure seal, maximum inlet water pressure is 75 psi.
Never install the pureWash in areas where water may freeze. pureWash will always
maintain some water in the unit and freezing can cause damage to internal components.
pureWash is not recommended for use in homes with high iron content in their water.
If your water has high iron content, consult a water quality expert for available options.
Your pureWash can be cleaned with a damp soft cloth. Do not clean your pureWash
with harsh chemicals, abrasives or cleaners.
Before using, please read this Owner’s Manual carefully.
To Next Page
Loading...
Need help?
General