GreenTech Pure Wash - Using the pureWash System; Operational Guidance

To Next Page

To Previous Page

Using your pureWash:

Daily Use

Using pureWash is very easy. You simply operate your washing machine according to the

instructions provided by the manufacturer. e only dierence is that you ONLY use the cold

water setting on your washer. If hot water is used it dilutes and defeats the eectiveness of the

enhanced and Photo Catalytic Oxidizers that the pureWash has introduced into the wash water.

Top-Load Washing Machines

When using pureWash with a top-loading washing machine, ensure that a bold or dark-colored

clothing item is not in the direct line of the pouring water. It is recommended to place a white

clothing item directly under the pour stream to absorb the initially high concentration of oxidizers.

Non-Use or Vacation Care

Operate your washer and pureWash only when you are at home. If you are on vacation or won’t

be using your washer for an extended period of time, you should unplug the power supplies

to both the washer and pureWash and turn o the water supply. is helps avoid accidental

ooding due to a water pressure surge while you are away.

Stains

We suggest that you pre-treat stains just as you would without a pureWash. However, for

normally soiled laundry, you should only need a very small amount of detergent or none at all.

How to tell pureWash is Working

You can easily tell if pureWash is operating properly by viewing the water as it ows through

the clear tube behind the window on the unit. Bubbles should be visible in the water as it ows

through and the window should emit a blue glow. If you do not see bubbles, please ensure that

you have the proper unit for your washing machine. High-eciency or front load washers should

use Eciency pureWash, but standard-eciency top-loading washers should use Standard

pureWash. If the Standard pureWash is used on a high-eciency washer, there will be no bubbles

and you will not experience the benets of using pureWash.