Do you have a question about the Greenwood EL100 and is the answer not in the manual?
Details the 'HT' type fans, their control inputs like pull cord, switched live, and humidity level.
Explains the integrated overrun timer facility and its preset timing for energy efficiency.
Advises against installing in opening windows and stresses using correct glass thickness.
Details the suitable glass thickness for fan installation, from single to double glazing.
Instruction to fit the rubber cable grommet onto the cable before threading through the fan back plate.
Guides through cutting openings, feeding cables, securing back plates, and fitting ducting for ceiling installation.
Instructions for wiring the SVI-DC controller, including connection types and safety notes.
Details how to adjust timer settings for minimum and maximum run times.
Explains how to set humidity sensitivity for automatic fan operation.
Guides on adjusting the PSU output voltage for varying power consumption and extract performance.