This document is an operator manual for a Greenworks Pro 60V UltraPower Lawn Mower, models MO60L07 and MO60L427 (LMC406).
Function Description:
This machine is designed for domestic lawn mowing. Its cutting blade operates approximately parallel to the ground, and all four wheels must remain on the ground during operation. The mower is designed to cut grass efficiently and safely. It features a 2-in-1 function, allowing for both mulching and rear bagging of grass clippings.
Important Technical Specifications:
- Voltage: 60 V
- Battery Models: LB602/LB6025/LB603/LB604/LB605/LB606 and other BAC series
- Charger Models: CAC801/CH60DP01/CH60R00/60DPC10A and other CAC series
- No-load Speed: 4000 RPM / 4500 RPM (Turbo)
- Height Adjustments: 1 3/8 - 4 inches (3.5 - 10.2 cm)
- Self-propelled Speed: 1.9-4.9 fps (0.6-1.5 m/s)
- Weight (without battery pack): 70.6 lbs (32 kg)
- Construction: Double-insulated
- Mower Storage Temperature Range: 32°F (0°C) - 113°F (45°C)
- Mower Operation Temperature Range: 32°F (0°C) - 113°F (45°C)
- Battery Charging Temperature Range: 39°F (4°C) - 104°F (40°C)
- Charger Operation Temperature Range: 39°F (4°C) - 104°F (40°C)
- Battery Storage Temperature Range: 32°F (0°C) - 113°F (45°C)
- Battery Discharging Temperature Range: 32°F (0°C) - 113°F (45°C)
Usage Features:
The mower is equipped with several features to enhance usability and safety:
- Start Button and Start Handle: The machine is started by pushing and holding the start button, then grabbing the start handles.
- Self-Propel Drive Lever: Allows the operator to engage a self-propel system for easier mowing, with adjustable speed control (Rabbit Symbol for increased speed, Turtle Symbol for decreased speed).
- Height Adjustment Lever: Enables quick and easy adjustment of the cutting height.
- Battery Door: Provides access to the battery compartment for installing and removing battery packs.
- Battery Capacity Indicator (LEDs): Four green lights indicate battery capacity: 4 lights (above 80%), 3 lights (80-60%), 2 lights (60-40%), 1 light (40-20%). Lights off indicate less than 20% capacity, requiring immediate charging.
- Turbo Button: Increases blade speed to 4,500 RPM for tougher cutting conditions.
- LED Headlight: Can be turned on by grabbing the start handle or self-propel lever when the mower is ready to start, providing illumination during operation.
- Mulch Plug: Allows for mulching operation by fitting it into the discharge chute.
- Grass Catcher: For collecting grass clippings during bagging operation.
- Safety Key: The motor only starts when the safety key is inserted, preventing unintentional operation.
- Automatic Switch Function: If one battery cannot operate, the machine automatically switches to the other battery (if two are installed).
- High Lift Blades: The mower comes with an extra set of high lift blades. Normal stock blades are optimized for efficiency on dry, shorter grasses, while high lift blades are designed for extreme conditions, featuring deeper curves to increase suction and prevent clogging in tall or wet grass.
Maintenance Features:
Regular maintenance is crucial for safe and efficient operation:
- Blade Replacement: The manual provides detailed instructions for replacing the blade, emphasizing the use of approved replacement parts and wearing heavy gloves. Blades should be replaced if bent or cracked, and sharpened equally at each end to maintain balance.
- Cleaning: The mower should be kept free of grass, leaves, and other debris. The bottom of the mower deck should be cleaned after each use. Strong solvents or detergents should not be used on plastic parts.
- Storage: The machine can be stored vertically to save space. Before storing, the safety key and battery pack(s) must be removed, and the machine should be cleaned and allowed to cool. It should be stored in a dry area, out of reach of children, and inspected for loose or damaged parts.
- Inspections: Frequent checks of the blade, motor mounting bolts, nuts, bolts, screws, grass catcher components, and discharge guard are recommended to ensure they are tight and in good working condition. Safety devices should be checked regularly for proper operation.
- Battery Care: Batteries should be handled with care to avoid shorting. They should not be exposed to fire or excessive temperatures. Damaged batteries should be discarded properly and not repaired.
- Lubrication: Routine maintenance items include lubricants and blade sharpening.
- Troubleshooting Guide: The manual includes a troubleshooting section to help identify and resolve common issues such as the mower not starting, uneven cutting, or excessive vibration.
Need help?
General
To Next Page