GreenWorks 22132 - User Manual

This document is the owner's manual for the Greenworks 24V Lithium-Ion 22" Cordless Hedge Trimmer, model 22132. It provides essential information for safe and effective operation, including specifications, safety rules, assembly instructions, operating procedures, battery charging, maintenance, and troubleshooting.

Function Description

The Greenworks 24V Lithium-Ion 22" Cordless Hedge Trimmer is a battery-operated power tool designed for trimming hedges and shrubs. It utilizes a lithium-ion battery pack to provide cordless operation, offering freedom of movement without the need for an electrical cord. The trimmer features a 22-inch blade suitable for cutting branches up to 5/8 inch in diameter. Its primary function is to efficiently cut and shape hedges, making it a valuable tool for garden maintenance. The design incorporates safety features such as a lock-off button and a trigger switch that must be depressed simultaneously to operate, preventing accidental start-ups. The rear handle is rotatable, allowing for comfortable operation at various angles.

Important Technical Specifications

Type: Cordless, battery-operated
Blade Length: 22 inches (55.9 cm)
Cutting Capacity: 5/8 inch
Reciprocating Speed: 2400 SPM (Strokes Per Minute)
Weight (without battery): 4.96 lbs
Battery: 24V Lithium-Ion (not charged upon purchase, requires initial charging)
Charger: Diagnostic charger with LED indicators for battery status.
Warranty: 4-year repair warranty for the product, 2-year warranty for the battery.

Usage Features

The hedge trimmer is designed for ease of use and safety.

Cordless Operation: Powered by a 24V Lithium-Ion battery, it offers mobility and convenience without the constraints of a power cord.
ON/OFF Switches: To operate the trimmer, the lock-off button (located behind the auxiliary handle) and the trigger switch (beneath the rear handle) must be pressed simultaneously. Releasing either switch will stop the blade rotation. An important safety feature is that if the trimmer is accidentally dropped, it will turn off and the blade will coast to a stop, then lock off again.
Rotating Rear Handle: The rear handle can be rotated 90 degrees to either side by pressing a lock button, allowing the user to achieve optimal cutting angles and reduce strain during various trimming tasks. To return the handle to the center, the lock button must be pressed again.
Battery Installation and Removal: The battery pack slides into a cavity in the handle housing and locks into place. Removal requires sliding down the latch button and pulling the battery out. The battery pack fits snugly to prevent accidental dislodging.
Guard: A guard is integrated into the design to help deflect chips and debris away from the operator's hands and eyes, enhancing safety during operation.
Eye Protection: The manual strongly emphasizes the importance of always wearing eye protection (safety goggles, not just glasses) to prevent permanent eye damage from thrown objects.
Work Area Safety: Users are advised to keep the work area clean, well-lit, and free from bystanders, children, and visitors. The tool should not be used in wet conditions or explosive atmospheres.
Personal Safety: Operators should stay alert, avoid overreaching, maintain proper footing and balance, and dress appropriately (no loose clothing or jewelry). Long hair should be contained.
Environmental Considerations: The manual includes instructions for environmentally safe battery disposal, noting that Lithium-Ion batteries contain toxic and corrosive materials and should be taken to certified recycling or disposal centers.

Maintenance Features

Proper maintenance is crucial for the longevity and safe operation of the hedge trimmer.

Cleaning: The exterior of the hedge trimmer should be wiped with a dry, soft cloth. The guard should be scraped to remove dried clippings and mud. Dust, debris, and grass clippings should be brushed or blown out of the air vents to keep them clear. Water or detergents should not be used directly on the battery or charger.
Blade Maintenance: The manual advises against removing the blade assembly unless it needs sharpening, straightening, or replacing, and recommends taking it to a qualified person for such repairs. It also warns against using the tool if the blade assembly is damaged or bent.
Battery Pack Storage: Battery packs should be stored fully charged. After charging, the battery should be removed from the charger, and the charger unplugged. Battery packs should not be stored on the tool or in the charger.
Charger Maintenance: The charger should be kept clean and free of debris. Foreign material should not be allowed into the recessed cavity or onto the contacts. The charger should be wiped with a dry cloth, avoiding solvents or water. It should always be unplugged when no battery pack is in it. The charger and battery pack should be kept at normal room temperature (between 45°F and 104°F) and out of direct sunlight. If the battery pack is hot, it should be allowed to cool before recharging.
General Tool Care: The tool should be stored indoors in a dry, high, or locked-up place, out of reach of children, when not in use. Moving parts should be checked for misalignment or binding, and damaged parts should be serviced before use.
Service: Tool service, especially for damaged parts or electrical components, must be performed by qualified repair personnel using identical replacement parts to ensure safety and prevent further injury or shock. The helpline (1-888-90WORKS) is available for assistance.