13
ASSEMBLY
ASSEMBLING THE HANDLEBAR (See Figure. 4)
• Align the holes on the upper handle with the holes on the lower handle. Insert the bolts, and
tighten them using the wing nuts provided.
• Fold the handle base on the Fig.3 - 3.1
Step1: Release the wing nuts
Step2: Rotate the middle handle
base on the arrowhead 1
way (See Fig 3-1)
Fig. 4
Fig. 3.1
Fig. 3
LOWER HANDLE
UPPER
HANDLE
Wing nut
arrowhead 1
To Next Page
Loading...
