Problem Possible cause Solution
The motor is on,
blades do not
move.
The machine
has damage.
Do not use the
machine and
speak to service
center.
The blades are
blocked.
Remove battery
pack then clear
blockage from
the blades.
There is too
much noise
and/or vibration
during operation.
The parts are
loosen.
1. Stop the ma-
chine.
2. Remove the
battery.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
The parts have
damage.
Do not use the
machine and
speak to service
center.
8 TECHNICAL DATA
Voltage 40V
No load speed 2800
(±10%) /min
Blade speed 2800(±10%) /
min
Blade length 610 mm
Cutting capacity 27 mm
Weight (without battery pack) 2.7 kg
Measuered sound pressure level 78.6 dB(A),
k=3.0
Measuered sound power level 98.6 dB(A),
k=3.0
Guaranteed sound power level 100 dB(A)
Vibration <2.5 m/s
2
Uncertainty 1.5 m/s
2
9 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product,
and 2 years on batteries (consumer/private usage) from
the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described in
the owner’s manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Propellergatan 1, 211 15 Malmö, Sweden
Name and address of the person authorised to compile
the technical file:
Name: Peter Söderström
Address: Propellergatan 1, 211 15 Malmö, Sweden
Herewith we declare that the product
Category: Hedge Trimmer
Model: HTF313
Serial number: See product rating label
Year of Construc-
tion:
See product rating label
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts,
clauses of European harmonised standards have been
used:
• EN 60745-1,EN 60745-2-15,EN 55014-1,EN
55014-2, EN ISO 3744,ISO 11094,IEC
62321-3-1,IEC 62321-4, IEC 62321-5,IEC
62321-6,IEC 62321-7-1,IEC 62321-7-2,IEC 62321-8
Measured sound
power level:
L
WA
: 98.6 dB(A)
Guaranteed sound
power level:
L
WA.d
: 100 dB(A)
6
English
EN
To Next Page
Loading...
