J
Julie RhodesAug 19, 2025
Why is my GreenWorks Trimmer vibrating so much?
To Next PageTo Next PageWhy is my GreenWorks Trimmer vibrating so much?
General| Voltage | 40V |
|---|---|
| Cutting Width | 12 inches |
| Battery Type | Lithium-Ion |
| Runtime | Up to 45 minutes |
| Charging Time | 60 minutes |
| Power Source | Battery |
| Line Diameter | 0.080 inches |
Explains the intended use of the string trimmer and brush cutter.
Lists and identifies all parts of the machine with corresponding numbers.
Provides step-by-step instructions for unpacking the product and checking its contents.
Details the process of securely attaching the protective guard to the trimmer head.
Guides users through the procedure of connecting and securing the upper and lower shaft sections.
Explains how to correctly install the auxiliary handle for better control and comfort.
Provides instructions on how to attach and adjust the shoulder strap for proper carrying.
Details the steps required to safely insert the battery pack into the machine's compartment.
Outlines the procedure for safely detaching the battery pack from the machine.
Describes the correct sequence to power on the string trimmer/brush cutter.
Explains the simple action required to safely turn off the machine.
Offers helpful advice for safe and efficient usage of the machine during operation.
Provides guidance on how to achieve optimal cutting results and techniques.
Explains how to automatically extend and adjust the cutting line length.
Details the process for changing the machine's cutting diameter setting.
Describes the function and importance of the line cut-off blade on the guard.
Provides essential precautions and general advice before performing any maintenance.
Outlines the recommended procedures for cleaning the trimmer after use.
Step-by-step guide on how to remove the old spool and install a new one.
Instructions for winding and installing new cutting line onto the spool.
Details the steps to correctly put together the trimmer head components.
Explains the procedure for safely detaching the trimmer head from the shaft.
Guides on how to replace the bump knob on the trimmer head spool.
Step-by-step instructions for assembling the brush cutter attachment.
Details the process for safely detaching the brush cutter attachment.
Provides safety precautions and steps to take when transporting the machine.
Gives advice on how to properly store the trimmer to ensure its longevity.
