EasyManua.ls Logo

GreenWorks GLM801601 - User Manual

GreenWorks GLM801601
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Read all safety rules and instructions carefully before operating this tool.
Owners Manual
TOLL-FREE HELPLINE: 1 (855) 345-3934
www.greenworkstools.com/80V-PRO
21” 80 V Lithium-Ion Cordless Mower
2500402
GLM801601

Questions and Answers

  • J
    Jeffrey FloresAug 1, 2025
    Why my GreenWorks Lawn Mower does not start?
    • N
      Natasha MackAug 2, 2025
      Your GreenWorks Lawn Mower might not start due to a few reasons. First, grass may be jammed between the deck and blade; remove the battery and check under the deck for any obstructions. Another reason could be that the battery is not fully inserted; ensure it clicks into place. Also, the battery may require service or replacement.
  • A
    Angela MorganAug 8, 2025
    Why is my GreenWorks GLM801601 cutting grass unevenly?
    • B
      Bryan LewisAug 8, 2025
      Uneven cutting by your GreenWorks Lawn Mower can occur if the lawn is rough or uneven; check the mowing area. It may also happen if the cutting height is not set properly; adjust the wheels to a higher setting.
  • A
    Amber HaleyAug 13, 2025
    What to do if my GreenWorks GLM801601 Lawn Mower does not mulch properly?
    • P
      Paul SimmonsAug 13, 2025
      If your GreenWorks Lawn Mower isn't mulching properly, it could be because wet grass clippings are sticking to the underside of the deck; wait until the grass dries before mowing. Alternatively, the mulching plug might be missing; install the mulching plug.
  • J
    John PriceAug 20, 2025
    Why is my GreenWorks GLM801601 so hard to push?
    • S
      Stephanie WatsonAug 20, 2025
      Your GreenWorks Lawn Mower might be hard to push if the grass is too tall, or the cutting height is too low; raise the cutting height. Also, the rear of the grass catcher bag dragging in thick grass can cause this issue; empty the grass clippings from the grass catcher bag.
  • P
    Paige RobinsonAug 26, 2025
    Why is my GreenWorks GLM801601 excessively noisy and vibrates?
    • D
      daviscolleenAug 26, 2025
      Excessive noise and vibration in your GreenWorks Lawn Mower can be due to a bent motor shaft; stop the motor and inspect for damage, repairing it before restarting. The blade might also be unbalanced.

Summary

Product Specifications

Safety Information

General Safety Rules

Essential safety guidelines, warnings, and precautions for operating the mower.

Child Safety

Guidelines for ensuring children's safety around the lawn mower during operation.

Battery and Charger Safety

Rules for safe handling, charging, storage, and disposal of batteries and chargers.

Service

Assembly Instructions

Operating Your Lawn Mower

Starting and Stopping the Mower

Procedure for starting the mower motor and stopping it safely.

Cutting Height Adjustment

Instructions on how to adjust the cutting height of the mower for different grass lengths.

Slope Operation and Safety

Guidance on safely operating the mower on slopes and using the slope gauge.

Maintenance

Replacing the Cutting Blade

Step-by-step guide for safely removing and installing the mower blade.

Service

Environmentally Safe Battery Disposal

Troubleshooting

Common Issues and Solutions

Table of common problems, their causes, and recommended solutions for the mower.

Warranty Information

GreenWorks GLM801601 Specifications

General IconGeneral
BrandGreenWorks
ModelGLM801601
CategoryLawn Mower
LanguageEnglish

Related product manuals