GreenWorks MO40B01 - Symbols and Signal Words

8
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watts
Power
min
Minutes
Time
Direct Current
Type or a characteristic of current
n
o
No Load Speed
Rational speed, at no load
/min
Per Minute
Revolutions, strokes, surface speed, orbits etc.,
per minute
Safety Alert
Indicates a potential personal injury hazard.
Wet Conditions Alert
Do not expose to rain or use in damp locations
Read The Operator’s Manual
To reduce the risk of injury user must read and
understand operator’s manual before using this
product.
Eye Protection
Always wear safety glasses with side shields that
are marked to comply with ANSI Z87.1.
Keep Hands and Feet Away
Keep hands and feet away from blade and cutting
area.
No Reach
Do not reach hands or feet under mower deck.
No Slope
Do not operate on inclines greater than 15º. Mow
across the face of slopes, never up and down.
’
Keep Bystanders Away
Keep all bystanders at least 100 ft. away.
Ricochet
Pay attention that bystanders are not injured
through foreign objects thrown from the mower.