EasyManua.ls Logo

GreenWorks MO40B00 - User Manual

GreenWorks MO40B00
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
P0802384-00
P0802384-00
GW 40V 14寸推草机
2506302/2508202
技术要求:
2.48P, 内容见电子档;保证色块朝外
3.单色印刷,要求无色差、无污点;
4.骑马钉,裁切均匀、无连页;
5.以封样为准。
1.材质要求:60g双胶纸;
常州格力博集团
说明书
许乃鑫
蒋思聪
B
周艳
王小妮
李海平
20.04.25
版本号
描 复
日 期
工艺
审核
校对
设计
标记
处数
签名 日期
阶段标记
视角标记
重量 比例
批准
审定
标准化
日期
更改文件号
SCALE: A5
210mm
145mm
6.料件需符合格力博HSF文件(编号:GLB-CGR-146) 里关于环保和有害物质的具体要求。
B

Table of Contents

Questions and Answers

  • A
    Andrew HernandezAug 19, 2025
    Why does my GreenWorks MO40B00 Lawn Mower stop while mowing?
    • J
      Jenna PalmerAug 19, 2025
      Your GreenWorks Lawn Mower might stop during mowing due to several reasons: the blade height might be too low, so try increasing it; the battery pack may be out of power, so ensure to charge it; grass clippings might be attached to the deck or the blade, in this case, remove the battery pack and check the deck; or the machine's operation temperature might be too high, so allow the machine to cool down.
  • S
    Sarah AbbottAug 21, 2025
    What to do if my GreenWorks MO40B00 stops during mowing?
    • H
      hollywestAug 21, 2025
      Your GreenWorks Lawn Mower might stop during mowing due to several reasons: the blade height could be too low, requiring you to increase it; the battery pack might be out of power, so you should charge it; grass clippings might be attaching to the deck or blade, in which case you should remove the battery pack and check the deck; or the operating temperature of the machine may be too high, requiring you to cool it down.
  • H
    hammondjoelAug 23, 2025
    Why won't my GreenWorks MO40B00 start?
    • A
      Amber RichardAug 23, 2025
      If your GreenWorks Lawn Mower doesn't start, it could be due to a low battery, so charge the battery pack. It could also be due to a defective bail switch, which would need replacing. Another possibility is that the battery key is not inserted; make sure to put it in.
  • R
    Robert FloresAug 26, 2025
    Why does my GreenWorks MO40B00 stop during mowing?
    • R
      Rebecca RodriguezAug 26, 2025
      Your GreenWorks Lawn Mower might stop during mowing for several reasons. The blade height could be too low, so try increasing it. Also, the battery pack may be out of power, so charge it. Grass clippings might be attached to the deck or the blade; in this case, remove the battery pack and check the deck. Finally, the operating temperature of the machine may be too high, so cool the machine.
  • E
    Eddie MccartyAug 28, 2025
    What to do if my GreenWorks Lawn Mower does not start?
    • J
      Jodi BeasleyAug 28, 2025
      If your GreenWorks Lawn Mower doesn't start, it could be due to a few reasons. First, check if the battery capacity is low and charge the battery pack if needed. Second, the start handle might be defective, requiring a replacement. Finally, ensure the battery key is properly inserted.
  • C
    Christopher RiceAug 30, 2025
    How to fix uneven grass cutting with my GreenWorks Lawn Mower?
    • M
      Michael NunezAug 30, 2025
      Uneven grass cutting with your GreenWorks Lawn Mower can occur if the lawn is rough, so examine the mowing area. Alternatively, the blade height might not be set correctly, requiring you to move the wheels to a higher position.
  • J
    Jeffrey CaldwellSep 1, 2025
    What to do if my GreenWorks Lawn Mower does not mulch correctly?
    • E
      Erica DunnSep 2, 2025
      If your GreenWorks Lawn Mower doesn't mulch correctly, it could be because wet grass clippings attach to the deck, so wait until the grass dries before mowing. Alternatively, the mulch plug might be missing, so install the mulch plug.
  • W
    wheelerdeborahSep 4, 2025
    How to fix uneven cuts with a GreenWorks MO40B00 Lawn Mower?
    • F
      franciscothomasSep 4, 2025
      If your GreenWorks Lawn Mower cuts grass unevenly, it might be because the lawn is rough, so examine the mowing area. Alternatively, the blade height might not be set correctly, so move the wheels to a higher position.
  • A
    alanvalenciaSep 6, 2025
    How to adjust the handle position on a GreenWorks Lawn Mower?
    • P
      paulpetersonSep 6, 2025
      If the handle of your GreenWorks Lawn Mower is not in position, adjust the height of the handle and make sure that the bolts and nuts are aligned correctly.
  • J
    Jeffrey HarrisonSep 8, 2025
    Why is my GreenWorks MO40B00 Lawn Mower hard to push?
    • B
      brownstevenSep 9, 2025
      If your GreenWorks Lawn Mower is hard to push, it could be because the grass is too tall, or the blade height is too low, so increase the blade height. Another reason could be that the grass catcher and the blade are dragging in thick grass, so empty the grass clippings from the grass catcher.

GreenWorks MO40B00 Specifications

General IconGeneral
MotorBrushless
Voltage40V
Cutting Width20 inches
Deck MaterialSteel
Power SourceBattery
Battery IncludedYes
Charger IncludedYes
TypeElectric Lawn Mower
Battery CompatibilityGreenWorks 40V

Related product manuals