GreenWorks MO48B2210 - Unfold and Adjust the Handle; Install the Upper Handle; Install the Grass Catcher

8.2 UNFOLD AND ADJUST THE
HANDLE
4
9
1. Pull up and back the upper handle to lift the handle into
operation position.
2. Tighten the lower handle (4) with quick-release levers (9)
on the two sides.
NOTE
Make sure that the two handles are in the same position.
WARNING
Do not make damage to the cables when you fold or unfold
the handle.
8.3 INSTALL THE UPPER HANDLE
3
10
10
11
11
4
P
1. Align the holes in the upper handle (3) and the lower
handle (4).
2. Put the cam locks (10) through the holes.
3. Tighten the knobs (11) onto the cam locks.
4. Do the same operation on the other side.
8.4 INSTALL THE GRASS CATCHER
7
13
12
1. Remove the mulch plug.
2. Open the rear discharge door (5) and hold it.
3. Hold the the grass catcher (7) by its handle (12) and put
the hooks (12) over the slots (13).
4. Close the rear discharge door.
9
English
EN