GreenWorks MO60L810 - English; Table of Contents

1 Introduction............................ 4
1.1 Product description......................... 4
1.2 Intended use................................... 4
1.3 Overview.........................................4
1.4 Symbols on the product.................. 4
1.5 California Proposition 65.................4
2 Safety...................................... 5
2.1 Safety definitions............................ 5
2.2 Lawnmower safety warnings.......... 5
2.3 Safety features on the product........7
2.4 Check the cutting deck................... 7
2.5 Grass catcher..................................7
2.6 Blade Activation Lever.................... 7
2.7 Battery safety..................................7
2.8 Battery charger safety.....................7
2.9 Safety instructions for
maintenance................................... 7
3 Assembly................................8
3.1 Install the upper handle.................. 8
4 Operation................................ 9
4.1 Before using the product.................9
4.2 Adjust the Handlebar Position........ 9
4.3 Set the cutting height...................... 9
4.4 Use the product with grass
catcher.......................................... 10
4.5 Switch to mulching mode..............10
4.6 Switch to side discharging mode...11
4.7 Mowing without a grass
catcher or mulch plug ...................11
4.8 Connect the battery to the
product.......................................... 11
4.9 Start the product............................11
4.10 Activate Turbo Boost
(Temporarily Increased
Cutting Speed)..............................12
4.11 Operate the self-propelled
drive system..................................12
4.12 LED Headlights.............................12
4.13 Stop the product........................... 12
4.14 Recommendations for
Effective Lawn Mowing................. 13
5 Maintenance......................... 14
5.1 Maintenance schedule..................14
5.2 General inspection........................14
5.3 Clean the product......................... 14
5.4 Clean the battery and battery
charger..........................................15
5.5 Examine the cutting equipment.... 15
6 Transportation, storage,
and disposal.........................17
6.1 Set the product in
transportation position.................. 17
6.2 Transportation...............................17
6.3 Disposal of the battery,
battery charger, and product.........17
7 Troubleshooting...................18
8 Technical data...................... 18
9 Limited warranty.................. 19
3
English
EN