To Next PageTo Next PageHow to fix GreenWorks Optimow 4 Lawn Mower connectivity when the indicator LED is flashing?
If the indicator LED is flashing, then restart the Greenworks Lawn Mower with the Start button to allow Bluetooth connection again.
What to do if the indicator LED is flashing (Error) on GreenWorks Optimow 4?
If the GreenWorks Lawn Mower stopped because of an error, you'll need to find out why the error occurred. After you've identified the reason, press the Start button on the mower to restart it.
How to fix GreenWorks Optimow 4 when indicator LED flashing (Operating)?
Place the Greenworks Lawn Mower in the charging station. Make sure a mobile device with the Greenworks tools App is close to the mower for a software update. This may take up to an hour for the green LED to stop flashing. If the LED continues to flash, restart the robot outside the charging station and try again.
General| Brand | GreenWorks |
|---|---|
| Model | Optimow 4 |
| Category | Lawn Mower |
| Language | English |
Connect the power supply in a cool, dry environment, away from direct sunlight.
Lay down the loop wire and secure it using pegs or by burying it in the ground.
Understand the meaning of warning symbols and safety icons used on the mower.
Guidance on understanding the symbols and text conventions within the operator manual.
Safety training, preparation steps, area inspection, and safe operational practices.
Step-by-step guide to safely start and stop the robotic lawnmower.
Instructions for keeping the mower in safe working condition and proper storage.
Key safety rules for operating the robotic mower, including handling, supervision, and area clearance.
Guidelines for environmentally correct disposal of electronic equipment and batteries.
Explanation of mower indicator LED status and their meanings.
Troubleshooting steps for breaks in the boundary and guide wires.
Manufacturer, model, and compliance information with EU directives and standards.
