Operation manual SP 9 - Compact
CHAPTER III – DESCRIPTION OF PLOUGH – Page 4
Parts Standard equipment Optional equipment
Other equipment • Signalization console * • Hydraulic adjustment of gear
• Grégoire Besson* rear
signalization
* : If the plough is use
d
in traffic
the owner
or the used must take
responsibility of keeping the rules
and regulations of this country* :
• Hydraulic arm of the wheel
inclinat
ion.
• Electronica
l kit for the
wheel
Dual contro
l or TCE 30.
Plough heads • Plough heads with self-edging
blades and r
everse chisel-end
• Breasts: short screw (
H
4 / H5), or
universal (American) (3A / 5A), or
cylindrical (
C 14 / C 16 / P 14 / 16)
• adjusting b
l
ock
• Crossing joint adjust
ing
• choice of the breast (long,
screwed, slo
tted, plastic…)
• Breast extensions.
• Rostrate blade, guide plough
head (35 x
35 mm angular chisel
end).
• Choice of
blade width (blades) :
14’’, 16’’, 18’’.
Complements of
wearing parts
• Profiled chisel-end
• Deflectors,
• Short coult
e
r wing-end,
• Long coult
e
r wing-end,
• Furrow widening,
• Panbreaker
Skim-coulter • Can be adjusted vertically,
forward and back
• Security pin protection
• Mixed t
ype
or for dunging
• Other mo
dels: Universal, Euro,
Corn
For optimal usage of the plough work there are a lot of possibilities.
The GRÉGOIRE-BESSON dealers know well the environment and soil conditions where ploughs will
be used. If necessary they can help you in the choice of engineering decision and can show you
innovations (new optional possibilities, new models).
Be sure to turn to the GRÉGOIRE-BESSON dealer to discuss the plough technique.
The GRÉGOIRE-BESSON firm is present at fairs and professional exhibitions.
To Next Page
Loading...