Operation manual SP 9 - Compact
CHAPTER VII – P
REPARATION OF PLOUGH BEFORE THE OPERATION – Page 5
7.6. LEARN THE NAMES OF THE PLOUGH SPARE PARTS
1. Holdfast
2. Plough nose
3. Underground coulter pinion (optio
nal)
4. Reversible chisel
end
5. Blade
6. Breast
7. Skate *
8. Reversing plough sole
9. Plough so
le tightening
10. Adjusting breast
* The skate is the spare part on which abrasive
elements are screwed up.
The model on the figure : TA plough bottom and H8 – right
breast
7.7. VIEW WHERE THE PLOUGH ADJUSTING MECHANISMS ARE
AND CHECK THEIR WORK
1 Adjusting of hydraulics compensation cylinder (optional)
2 Angular offset adjusting
3 Non-stop hydraulics security pressure adjusting (optional)
4 The wheels depth adjustment
5 The wheels direction adjustment
For attaining the optimal power capacity of the wheel and for quick adjusting on the fields get to
know the place of the plough adjusters. Be sure of the adjusting screws or bolts or elements and
their suitable operation. If it is necessary lubricate them. These checking tasks are easier to fulfill in
the machine-shop than in the filed.
To Next Page
Loading...