16
| 16 20
Following are some examples to show the functions and how they stack up.
Although we intend for Race Director to offer a basic feature set, this is still quite
complete and allows you to setup your wheel or dash to your liking.
One thing to keep in mind, the ‘alwaysOn’ function is intended for use with buttons
and encoders. Therefore this option has been omitted from dashboard LED options.
Example #1
This one is easy. This LED will always show a static, green LED. It really doesn’t
matter in which function you place the ‘alwaysOn’ in this case, as there are no other
function fighting for priority.
Example #2
As shown above, the ‘alwaysOn’ moved to ‘Function 2’. While the spotter is active,
‘Function 1’ will be shown.
When ‘Function 1’ is not shown, ‘Function 2’ will be shown.
To Next Page
Loading...