Need help?Do you have a question about the Grillo Climber 9.21 and is the answer not in the manual?
General| Blades | 1 |
|---|---|
| Transmission | Hydrostatic |
| Speed | 0 - 9 km/h |
| Wheel Size | Front: 16x6.50-8, Rear: 20x10.00-8 |
| Engine Type | 4-stroke |
| Cutting Height Adjustment | Central |
Explains the meaning of the danger symbol used in the manual and on the machine.
States machine compliance with EEC standards and CE mark.
Emphasizes reading manual, checking hot parts before operation.
Danger of exhaust fumes and need for ventilation.
Avoid touching moving parts; no maintenance with engine running.
Risks from tire explosion and sharp components.
Precautions for handling fuel and battery safety.
Warning against tipping and about rotating blades.
Warns about sharp parts and ejected foreign bodies.
Warning against operating on slopes over 17° (30%).
Emphasizes caution and reading instructions.
Lists checks before starting mower.
Defines operator duties and restrictions.
Precautions for fueling, storage, and engine compartment cleanliness.
Do not tamper with safety devices or use without guards.
Guidelines for maintenance, blade replacement, and using original parts.
Locating the serial number label on the machine.
Contacting Area Dealers for assistance.
Using original spare parts and guarantee information.
Engine, gearbox, tires, dimensions, weight.
Initial checks, fluid levels, and battery handling.
Running-in maintenance and essential pre-start checks.
Step-by-step engine starting procedure.
Starting work, using PTO and travel lever.
Brake usage and efficient operation advice.
Adjusting height, mowing slopes, and safety device function.
Safety and environmental precautions for maintenance.
Engine oil/filter, gearbox/hydraulic oil changes.
Tyre pressure check and air filter maintenance.
Importance of sharp blades and checking blade mounting.
Fitting blades and leveling the cutting plate.
Blade belt, hydrostatic belt, and replacement.
Blade rotation control and traction release lever.
Issues with power, starter, difficult starting, no fuel.
Performance drops, uneven cutting, stalling.
Troubleshooting blade engagement issues.
Blade faults, PTO issues, electrical system troubleshooting.
Adjusting neutral return and travel speeds.
Stopping, cleaning, and storage preparation.
Guidelines for loading and securing the mower.
Engine noise level at specified speed.
Machine vibration levels at specified speed.
To Next Page