Grillstream GSC35MG - Fittings and Hardware; Tools Required for Assembly; Prepare Frame for Assembly

GSC35MG
Page 10
Fittings
NOTE: ALL HARDWARE IS DRAWN IN FULL SCALE TO HELP IDENTIFY EACH PART
Make sure your grill is assembled properly. Detailed assembly
instructions are packed with each grill giving specic assembly
procedures for each model. Follow these instructions carefully to
ensure the correct and safe assembly of the grill.
x 4 x 12
x 44
x 12
x 2
x 44
x 4 x 12
x 44
x 12
x 2
x 44
x 4
x 12
x 44 x 12
x 2
x 44
x 4
x 12
x 44 x 12
x 2
x 44
x 4 x 12
x 44 x 12
x 2
x 44
x 4 x 12
x 44 x 12
x 2
x 44
x 2
Tools required (not supplied)
M4x12 Screw M6x12 Screw M4 Captive Nut Fibre Washer Star Washer Door Hinge Magnet
Caution: Although we take every eort to ensure that the assembly
process is as easy as possible, it is inherent with fabricated steel parts
that corners and edged can cause cuts if improperly handled during
assembly procedures. Be careful while handling any parts during
assembly. It is strongly recommended that you protect hands with a
pair Caution:of work gloves.
Cross Head Screwdriver (Philips)
x 4 x 12
x 44 x 12
x 2
x 44
Spanner
x 4 x 12
x 44 x 12
x 2
x 44
Prepare frame for assembly
Lift hood, remove & unpackage all items except burners & burner assembly.
Proceed to step 1