EasyManua.ls Logo

Grizzly EHS 600-61 R - General Description; Overview; Function Description; Scope of Delivery

Grizzly EHS 600-61 R
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
89
cidents or damage to other people or their
property.
The manufacturer is not liable for damages

-
eration.
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt, in
order to avoid overstressing of the
machine. Damages caused by cut-
ting with blunt blades are not cov-
ered by the guarantee.
General Description
See page 2 for illustrations.
Overview
1 Safety blade
2 Hand protection
3 Loop grip with deadman switch
4 Vents
5 Grip adjustment release
6 Five-position adjustable grip
7 Mains cable
8 Tension relief
 󰀨
10 Blade protection
Function Description
The electric hedge trimmer is driven by
an electronic motor. The equipment is
double-insulated for safety and does not
require earthing.
The hedge trimmer is equipped with a dou-
ble-sided safety cutter bar. When cutting,
the blades move backwards and forwards
in linear motion.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and briars.
Please note the following descriptions for
the function of the operating components
.
Scope of delivery
- Electric hedge trimmer
- Blade protection
- Instruction Manual
Operating the Hedge
Trimmer
Wear suitable clothing and work
gloves when working with the
equipment.
Ensure that the equipment is
functional before each use. The
On/O󰀨 switch and the safety
switch must not be held closed.
They must switch o󰀨 the motor
when on is released. Should a
switch be damaged, stop working
with the equipment. Ensure that
the mains voltage value matches
the label on the equipment.
Note noise protection and local

equipment on certain days (e.g.
Sundays and national holidays), at
certain times of day (lunch times,
night time quiet periods) or in spe-
cial areas (e.g. health resorts, clin-
ics etc.) is restricted or forbidden.
The blades continue to move for
a while after the equipment is
switched o󰀨. Allow the blades to
come to a complete standstill. Do
not touch the moving blades and
do not brake them. Risk of injury!

Table of Contents

Related product manuals