Grizzly G0738 User Manual

32 pages

To Next Page

MODEL G0738

HANGING 3-SPEED

AIR FILTER

OWNER'S MANUAL

(For models manufactured since 1/12)



WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.



Questions and Answers:

S
Stacy LeonardAug 5, 2025
Why is my Grizzly Water Filtration System vibrating or noisy?
- J
  Jennifer MarksAug 5, 2025
  If your Grizzly Water Filtration System is vibrating or operating noisily, consider these possible causes: * A motor or component might be loose. Inspect and replace any damaged bolts or nuts, and re-tighten them using thread-locking fluid. * The motor fan could be rubbing against the fan cover. Fix or replace the fan cover, and replace any loose or damaged fan. * The motor bearings may be faulty. Test them by rotating the shaft; if you notice rotational grinding or a loose shaft, bearing replacement is required.
J
Jessica HodgesAug 16, 2025
How to fix a stalled or underpowered Grizzly Water Filtration System?
- Y
  ymaysAug 16, 2025
  If your Grizzly Water Filtration System stalls or is underpowered, the following issues may be the cause: * The run capacitor might be faulty. Test, repair, or replace it as necessary. * The motor may be overheated. Clean the motor, allow it to cool down, and reduce the workload. * The motor itself could be faulty. Test, repair, or replace it.

Grizzly G0738 Specifications

General

Brand	Grizzly
Model	G0738
Category	Water Filtration Systems
Language	English

Summary

Introduction and Contact Information

Manual Accuracy and Updates

Information about the manual's accuracy and potential differences from the machine, including how to get updates.

Grizzly Support Contact Information

Details for contacting Grizzly Technical Support and Documentation Manager for assistance.

Component Identification

Machine Specifications Data Sheet

Safety Guidelines

General Machinery Safety Instructions

Comprehensive safety instructions for machinery operation, including personal protection and environmental awareness.

Air Filter Specific Safety Precautions

Special safety considerations and warnings unique to the operation of air filters, including dust hazards.

Power Supply

Power Supply Circuit Requirements and Grounding

Details on required electrical circuit size, grounding standards, and plug compatibility for safe machine connection.

Extension Cord Guidelines

Recommendations and specifications for using extension cords with the air filter, covering gauge and length.

Setup Procedures

Setup Preparation and Inventory Check

List of items needed for setup, unpacking instructions, and inventory check of components.

Power Connection and Initial Test Run

Steps for safely connecting power, performing a test run, and initial operation checks of the air filter.

Site Planning

Site Planning for Air Circulation

Guidance on selecting an optimal location for the air filter to maximize circulation and effectiveness.

Mounting Support and Clearance Requirements

Essential guidelines for properly supporting the air filter and ensuring adequate clearance during mounting.

Ceiling Mounting Procedure

Operations

Basic Operation Controls and Settings

How to turn the unit on/off, change fan speeds, and set the timer for operation.

Machine Storage and Handling

Proper procedures for storing the air filter when it is not in use to prevent damage and hazards.

Filtering Performance and Room Recirculation

Information on the air filter's efficiency, particle removal, and how to calculate room air recirculation rates.

Accessories

Maintenance

Air Filter Cleaning and Replacement

Step-by-step guide on how to clean the inner and outer filters for optimal performance.

Service and Troubleshooting

Troubleshooting Motor and Electrical Problems

Common problems related to motor and electrical systems, with possible causes and solutions.

Troubleshooting Air Filter Performance Issues

Diagnosing and resolving issues with loud noise, vibration, or poor dust collection performance.

Replacing the Control Panel Fuse

Instructions for safely replacing the fuse on the control panel and the correct fuse specifications.

Remote Control Battery Replacement Guide

Guide on how to replace the batteries in the remote control unit.

Wiring and Electrical Safety

Electrical Wiring Safety Precautions

Critical safety precautions when working with the machine's electrical wiring and components.

Electrical Wiring Diagram

Parts List

Cabinet and Remote Control Parts List

An illustrated list of replacement parts for the air filter cabinet and its remote control.

Control Panel Parts List

An illustrated list of replacement parts specific to the air filter's control panel assembly.

Motor and Impeller Parts List

An illustrated breakdown of the motor and impeller components, including part numbers.

Machine Labels

Warranty and Returns

Related product manuals