EasyManua.ls Logo

Groen CONVECTION COMBO OM-CC-E Series - User Manual

Groen CONVECTION COMBO OM-CC-E Series
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IMPORTANT INFORMATION
IMPORTANT INFORMATION IMPORTANT INFORMATION
IMPORTANT INFORMATION
KEEP FOR OPERATOR
KEEP FOR OPERATOR KEEP FOR OPERATOR
KEEP FOR OPERATOR
IMPORTANT INFORMATION
IMPORTANT INFORMATION IMPORTANT INFORMATION
IMPORTANT INFORMATION
(2)C/2-20EFC
CC10-E
OPERATOR MANUAL OM-CC-E and C/2-E
Part Number 121085 DOMESTIC
MODELS: CC10-E, (2)CC/0-E,
C/2-20-E, (2)C/2-20E
CONVECTION COMBO™
Combination Steamer-Oven
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,
UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS
CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND
LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE
.
OPERATOR MANUAL
Part Number 121085 Rev. B

Questions and Answers

  • K
    Kevin OwensAug 9, 2025
    What to do if the Groen Oven maximum generator fill time is exceeded?
    • C
      Cynthia MorganAug 10, 2025
      If the maximum generator fill time (5 minutes) has been exceeded on your Groen Oven, first ensure that the water supply is fully turned on and that hoses are not kinked or pinched. If the code is still displayed, the unit will operate in Oven Mode only.
  • N
    Natalie LeonAug 14, 2025
    What to do if the Groen Oven maximum generator drain time is exceeded?
    • N
      Nicole MartinezAug 15, 2025
      If the maximum generator drain time (three minutes) has been exceeded on your Groen Oven, inspect the drain line and remove any blockage. Also, make certain that the drain is free-vented as detailed in the Installation Section of this Manual.
  • J
    Justin MezaAug 19, 2025
    How to fix a low water level probe issue in Groen CONVECTION COMBO OM-CC-E?
    • R
      Rose ThorntonAug 19, 2025
      If the Groen Oven displays a low water level probe error, try cleaning the steam generator to remove contamination from the probes. If either code continues call your Groen Service Agency. If both codes are displayed the unit will only operate in the Oven Mode. If only one code is displayed the unit will operate in all modes, but water may overflow from the generator into the cooking chamber during operations in either the Steam or Combo Modes.
  • K
    kdorseyAug 25, 2025
    What causes time between fills error in Groen CONVECTION COMBO OM-CC-E?
    • L
      lisa70Aug 25, 2025
      If your Groen Oven shows a time between fills issue, check for a leaky fill valve. The unit will operate in Oven Mode only.
  • D
    Derrick BrooksAug 30, 2025
    What happens when the Groen CONVECTION COMBO OM-CC-E has a faulty air probe?
    • K
      Kenneth Stone MDAug 30, 2025
      If there is a faulty air probe in your Groen Oven, the unit will operate in Steamer and Clean Cycle Modes only.
  • D
    dwayne15Sep 3, 2025
    What happens if the Groen CONVECTION COMBO OM-CC-E Oven has a faulty generator probe?
    • B
      brian03Sep 3, 2025
      If there is a faulty generator probe in your Groen Oven, the unit will operate in Oven Mode only.

Groen CONVECTION COMBO OM-CC-E Series Specifications

General IconGeneral
TypeConvection Combo Oven
ConfigurationCountertop
Capacity10 pans
Power TypeElectric
ConstructionStainless Steel
Cooking ModesConvection, Steam, Combination
Warranty1 year parts and labor
Door TypeGlass
Power Supply208-240V
Control TypeDigital

Related product manuals